Samsung DVR-16TH, DVR-4TH Software Upgrade via Local Device, Software Upgrade via Internet

User’s Manual

5.1.1.2Software Upgrade via Local Device

This item is used for updating the DVR-4TH/ 8TH/ 16TH series unit software by local device. The menu is displayed as follows.

Software Upgrade via Local Device
Upgrade Version	Select
xxxx-xxxx-xxxx-xxxx	No

Connect a USB drive that contains the upgrade software to the unit; the upgrade files that are available will then be listed in the menu. To update the system, select a file and use UP / DOWN keys to choose <Yes>. Press ENTER to confirm the selection and start the upgrade process. The DVR-4TH/ 8TH/ 16TH series unit uploads the software, updates the system files, and reboots automatically.

The upgrade process may take several minutes to complete. After rebooting the unit, please check the software version again.

NOTE: If you want to upgrade your unit with a USB ThumbDrive® contains the newest software, make sure the software you want to use to update the unit should be fold into a folder named “upd_200s”, otherwise, the unit cannot recognize it.

NOTE: Power interruption cannot occur during the software upgrade process. Ensure that no power interruption can happen until the unit is completely rebooted.

NOTE: Do not remove the external USB ThumbDrive®/DVD+RW before the unit has completely shut down (hard drive and fan are off). Removing the external USB ThumbDrive®/DVD+RW before shut down can cause the system to update improperly.

5.1.1.3Software Upgrade via Internet

This item is used to upgrade the unit’s software via the internet. Select one of the listed software versions and choose <Yes>. The DVR-4TH/ 8TH/ 16TH series unit uploads the software, updates the system files and reboots automatically.

DVR-4TH/8TH/16TH Series	63
SPECO TECHNOLOGIES 07/10