User’s Manual
3.5System Date/ Time Setting
The user can set the current date, time and other OSD parameters in the Date/ Time menu. The login account should have authority to access the System Setup menu. In the OSD Main menu, select <System Setup> and press ENTER, then select <Date/ Time> to access the Date/ Time menu; the menu displays as follows.
Date/Time |
|
Date | 2009/02/21 |
Time | PM10:39:26 |
Time Zone | OFF |
Date/Time Display | 1 Row |
Date Display Mode | Y/M/D |
Time Display Mode | 24 HR |
Daylight Saving Time Setup |
|
Network Time Protocol Setup |
|
3.5.1Set Date/ Time
Set Date/ Time
Select <Date>/ <Time> and press ENTER to adjust the settings. LEFT/ RIGHT keys are used to move the cursor to previous or next field, ENTER is for selecting, and UP/ DOWN are used to change the value in the selected field.
NOTE: The reset date/ time setting applies for recording new video, the date and time of previously recorded video will not be changed.
NOTE: To avoid record database corruption, after changing the date/ time setting, it is recommended to clear the database.
Date/ Time Display
Users are allowed to choose to set the date/ time OSD displays in 1 or 2 rows. Use the UP/ DOWN keys to change the setting. The default is to display the date/ time OSD in one row.
Date Display Mode
This function allows user to set the OSD display type of the date/ time. There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y” represents “Year”, “M” represents “Month” and “D” represents “Day”.
28 | |
| SPECO TECHNOLOGIES 07/10 |
