Samsung DVR-4TH, DVR-16TH, DVR-8TH user manual User Graphic Interface, IP Camera Support, Key Beep

User’s Manual

5.1.9.2Key Beep

This item is used to enable or disable the key tone. Select <ON> to enable the key tone, or <OFF> to disable.

5.1.10User Graphic Interface

The OSD system can be displayed in graphic mode or text mode according to users’ preference. Set this menu to <Graphic> and the OSD system will be displayed in GUI mode. Alternatively, set this menu to <Text> and the OSD system will be displayed in text mode.

5.1.11IP Camera Support

Enter this item to add IP cameras to the DVR. The DVR supports up to 4 IP cameras. Select <0> will make the DVR act as a traditional analog DVR. Select <1> to <4> allows users to add 1 to 4 IP cameras to the DVR.

After the <IP Camera Support> is set to <1> to <4>, the following message will be displayed. Press ENTER to apply the changes, or ESC to exit.

Notice!!

DVR must reboot to apply the change

ENTER: Yes ESC: No

NOTE:

1.The existing database will NOT be re-formatted after switching to this function.

2.Alarm I/O, Motion detection function, and audio of the IP camera are NOT currently supported

86	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10