Samsung DVR-4TH, DVR-16TH, DVR-8TH user manual 3 RS485 Setup

User’s Manual

Analog Camera
Analog Camera Select	CH01
Dome Protocol	None
Dome ID	0
Camera Title	Ch1
Covert/ Privacy Mask	On
Termination
Brightness	0
Contrast	0
Saturation	0
Hue	0
Audio Association	Yes
Copy Settings

To configure dome protocol, first select a camera then set the communication protocol associated with that dome camera using the direction keys and press

ENTER.

NOTE: The settings only become effective after saving the changes and exiting from the menu.

4.6.3RS485 Setup

The DVR-4TH/ 8TH/ 16TH series unit controls the dome cameras via RS-485 communication protocol. The RS-485 parameters for the DVR-4TH/ 8TH/ 16TH series unit must be set to the same parameters set in the dome camera.

Users are allowed to change the RS-485 settings for the DVR-4TH/ 8TH/ 16TH series unit. Select <System Setup> in the Main menu, then select <RS485 Setup> from the System Setup menu and press ENTER. The following menu is displayed.

	RS485 Setup
Unit ID	224
Baud Rate	9600
Bits	8
Stop	1
Parity	None

The Unit ID number must match the ID address of the dome camera. The range of the Unit ID is from 1 to 255 while the default is 224. Note that no two devices on the same bus should be given the same ID address, or a conflict may occur.

DVR-4TH/8TH/16TH Series	53
SPECO TECHNOLOGIES 07/10