User’s Manual
•Press 1 to access the Set/Go Preset function. A virtual keyboard will be displayed as below.
1 | 2 |
4 | 5 |
78
0
3
6
9
Clear
BS
Set Preset
Go Preset
Exit
•Input a desired preset number.
•Click on the <Set Preset> button to save the position. Now the preset position is set and ready to be called.
4.6.6Calling Preset Points
Follow these steps to call preset points.
•Press a Channel key to view the corresponding camera in full screen.
•Then press DOME to enter dome control mode. Then a Hint Screen, shown as blow figure, will display on the screen.
•Press 2 to hide the dome control Hint Screen; press 2 again to toggle the Hint Screen.
•Press 1 to access the Set/Go Preset function.
1 | 2 |
4 | 5 |
78
0
3
6
9
Clear
BS
Set Preset
Go Preset
Exit
•Input a desired preset number.
•Click on the <Go Preset> button to call the preset point.
•Now the selected dome camera will rotate to the preset position automatically.
56 | |
| SPECO TECHNOLOGIES 07/10 |
