User’s Manual
5.6.8.1Channel Select
This item is used to select a desired channel for setting the parameters. Move the cursor to <Channel Select> and press ENTER, then select a channel using UP / DOWN keys. Press ENTER again to confirm the setting.
5.6.8.2Video Loss Detect
This item allows the user to enable / disable Video Loss as an alarm event. Select <ON> to enable Video Loss alarm events, <OFF> to disable. The default setting is <OFF>.
5.6.8.3Motion Detect
To detect motions, the users can choose from these options: <OFF>, <ALL>, <Night & Weekend>, <Day & Weekend>, <Weekend>, <Day & Night>, <Night>, and <Day>. The Day, Night, and Weekend is defined in section Schedule Setup.
If motion detection function is enabled, it is required to define the motion detection parameters such as detection area and sensitivity settings.
5.6.8.4Detection Config
If motion detection function is enabled, it is required to define the motion detection parameters such as detection area and sensitivity settings. Select a channel for setting the parameters, move the cursor to <Detection Config>, and press ENTER. The Detection Configuration menu displays as follows.
Detection Config |
|
Detected Area Setup |
|
Sensitivity | 92% |
Area Threshold | 4% |
Detected Area Setup
The Detect Area is displayed as follows after selecting this item. The detection area consists of 165 (15×11) detection grids.
111 | |
SPECO TECHNOLOGIES 07/10 |
|
