Samsung DVR-8TH, DVR-4TH, DVR-16TH Sequence Setup, Sequence on Main Monitor, Call Monitor Control

User’s Manual

4.2Sequence Setup

This section introduce how to view in sequence mode with both Main Monitor and Call Monitor, if connected. Sequence function can avoid manually backtracking and give more flexibility in surveillance.

4.2.1Sequence on Main Monitor

The automatic sequence function can be displayed in any viewing mode. Select certain viewing format and press SEQ to start the automatic sequence. Press ESC to stop and return to live mode. The figure below shows the example of displaying sequence in 4-channel viewing mode.

4.2.2Call Monitor Control

Users can use front panel of the DVR-4TH/ 8TH/ 16TH series unit to control a call monitor display without having to access the Main menu. Two viewing modes can be displayed on call monitor: Sequence display and Single camera display. To program the call monitor sequence, refer to section Sequence Setup.

Follow the steps below to control the call monitor.

•Press the CALL key on the front panel to enter call monitor control mode, the message “Call Mode” will then be shown on the bottom-left of the screen.

Press 1-16 Key To Select Channel

Press SEQ To Enable Sequence

•Press any CHANNEL key to display the image of the corresponding camera on the call monitor.

•Alternatively, press SEQ repeatedly to display the sequence of cameras previously programmed in Call Monitor Schedule menu.

•Press ESC to return the front panel to Main Monitor Control mode.

40	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10