User’s Manual
4.4.2.2Export Normal Video
To export normal video to an external device, follow these steps:
•Press SEARCH and play desired normal video by entering date and time.
•When the playback starts, press COPY once to mark the starting point of the export video. The playback continues.
•Press COPY again to mark the ending point of the export video. Then the “ezBurn” window will be displayed as shown below. The information shown on the window is “read only”.
ezBurn confirmation
Selected Device:
From: 2009/11/07 AM10:41:13 To: 2009/11/07 AM10:41:21 Enter: YES ESC: NO
or
Press CH N to assign
Digital Deterrent File Sound_N
NOTE: For more information about setting of Digital Deterrent function, please refer to section Digital Deterrent.
•Press ENTER to start the export, or press ESC to abort.
•If there is no exportable external device connected to the unit, then a warning message will be displayed on the screen, as shown below:
No exportable device detected.
Please install the target device/mediato the DVR.
Enter: Retry ESC: Exit
or
Press CH N to assign
Digital Deterrent File Sound_N
4.4.2.3Export Event Video
To export event video, follow these steps:
•Press SEARCH and playback desired event video. For details on how to playback event video, refer to section Searching by Event.
•When the playback starts, press COPY. The “ezBurn” window will be displayed as follows. The information shown on the window is “read only”.
50 | |
| SPECO TECHNOLOGIES 07/10 |