Panasonic 3000 warranty 130, Email Abbr Programming Errors, Error Message Sent to the Sender

Troubleshooting

Email ABBR Programming Errors

Error Message Sent to the Sender

Error messages that are emailed from the DP-2500/3000 to the original sender during remote programming of the Phone Book via email.

		Error message	Possible cause
1	554	Data transfer error (broken header)	The header or sub header decoding is being processed while
			the message finished, try again.
2	554	Data transfer error (broken data)	Multiple contents are present and being processed while the
			message finished, try again.
3	554	Data transfer error (FAX module)	Data transfer error occurred in the FAX module while
			communicating with the LAN module, try again.
4	554	MIME attachment not supported	MIME attachment is not supported during this operation, re-
	(message/file)		send using plain text in the message body only.
5	554	MIME format not supported	MIME file type is not supported, re-send using plain text in the
			message body only.
6	554	G3 relay permission denied	The requested domain for Relayed XMT is not registered.
7	554	Relay address unknown	The telephone number of end receiving station for the Relayed
			XMT is unknown.
8	554	Memory full (FAX module)	FAX Memory is full, try again later.
9	554	Data transfer error	Other errors not listed above, try again later.

Internet FAX Return Receipt Errors Messages

Error messages that are printed on the Internet Fax Return Receipt when remote programming of the Phone Book via email fails.

	Error message	Possible cause
1	Format Error : <@command block, the "@end"	The block termination command "@end" is missing in the
	command is missing.>	"@command" block, add the "@end" command and try again.
2	Format Error : <@begin block, the "@begin"	The block start command "@begin" is missing in the "@begin"
	command is missing.>	block, add the "@begin" command and try again.
3	Format Error : <@begin block, the "@end"	The block termination command "@end" is missing in the
	command is missing.>	"@begin" block, add the "@end" command and try again.
4	Format Error : <@system block, the "@end"	The block termination command "@end" is missing in the
	command is missing.>	"@system" block, add the "@end" command and try again.
5	Format Error : <@sender block, the "@end"	The block termination command "@end" is missing in the
	command is missing.>	"@sender" block, add the "@end" command and try again.
6	Format Error:<@domain block, the "@end"	The block termination command "@end" is missing in the
	command is missing.>	"@domain" block, add the "@end" command and try again.
7	Format Error : <@program block, the "@end"	The block termination command "@end" is missing in the
	command is missing.>	"@program" block, add the "@end" command and try again.
8	Format Error:<@system block, the "@system"	The system block start command "@system" is missing in the
	command is missing.>	"@system" block, add the "@system" command and try again.
9	Permission denied : <Fax Forward parameter is	Change the Fax Forward parameter to "Invalid" and try again.
	set to "Valid".>
10	Permission denied : <Fax machine is busy	Try again later when the machine is not busy.
	performing a task.>
11	Error : <Programmed ABBR overwrite prohibited.	Can not overwrite existing programmed data, use the "Delete"
	Use open ABBR only.>	command to erase the existing data first.
12	Permission denied : <Password is incorrect.>	Correct the password and try again.
13	Permission denied : <Remote Dialer Update	Set the Remote Dialer Update parameter to "Valid".
	parameter is set to "Invalid".>
14	Format Error : <error line>	The format of the Entry is incorrect / incomplete or the data string
		for each station is not defined within a single line.
15	Warning : <error line>	The format of the Entry is incorrect or the number of characters
		entered, exceed the maximum allowed in the field. Correct it and
		try again.
16	Warning : Field limit exceeded<error line>	The maximum number of Station Names, Key Names, Domain
		Names, Sender Selection Names, Program Names, etc... were
		exceeded.

130