Panasonic 3000 warranty Function Select Mode RCV to Memory

Customizing Your Machine

No.	Parameter	Setting	Setting				Comments
		Number
017	RECEIVE MODE	1	Manual	Setting the reception mode to automatic or manual.
		*2	Auto
022	SUBSTITUTE RCV	1	Invalid	Selecting whether the machine receives to memory when the
				recording paper runs out, toner runs out or the recording paper is
		*2	Valid	jammed.
024	PRINT REDUCTION	1	Fixed	Selecting the print reduction mode.
				Fixed :		Reduce received document according to setting of
		*2	Auto
						Parameter No. 025.
				Auto : Reduce received document according to the length of
						received originals.
025	REDUCTION RATIO	70	70%	Selecting the fixed print reduction ratio from 70% to 100%. This
				parameter functions only when the fixed print reduction is selected
		----	----
				on Fax Parameter No. 024.
		100	100%
026	POLLING PASSWORD		(----)	Setting a 4-digit password for secured polling.
027	POLLED FILE SAVE	*1	Invalid	Selecting whether the machine retains the polled document(s) in
				memory even after the document(s) is polled once.
		2	Valid
028	STAMP AT MEM. XMT	1	Invalid	Selecting whether the machine stamps the originals when storing
				into memory.
		*2	Valid
				(Depending on the Stamp setting on the Control Panel)
031	INCOMPLETE FILE	*1	Invalid	Selecting whether the machine retains the document in memory if
	SAVE			it is not successfully transmitted.
		2	Valid
033	XMT REDUCTION	1	Invalid	Selecting whether the machine performs reduction when the
				transmitting original is wider than the recording paper used at the
		*2	Valid
				receiving machine.
036	RING PATTERN	*1	Invalid	All ring patterns.
	DETECT (DRD)
		2	Valid	Select a ring pattern for automatic answering.
	(See Note 2)
				(Select Line-1 or Line-2 first, if you have the 2nd G3 Fax
				Communication Port Kit installed)
				1: A		Standard ring pattern.
				2: B		Double ring pattern.
				3: C		Triple ring pattern (Short-Short-Long).
				4: D		All other triple ring patterns, except the type C
						described above.
037	RCV TO MEMORY			Enter a 4-digit password for printing the received document(s) in
				memory by using
							FUNCTION			SELECT MODE
			(----)					.
					06 RCV TO MEMORY
				When					is set to ON, this parameter
						06 RCV TO MEMORY
				is not selectable on the LCD display.
038	ACCESS CODE		(----)	Enter		a 4-digit Access Code to			secure the machine from
				unauthorized use.
039	PIN CODE ACCESS	*1	None	Selecting the access method (Prefix or Suffix) to dial a number
				with PIN Code.
		2	Suffix
		3	Prefix

54