Panasonic 3000 Setting the Internet Parameters, Setting the User Parameters for the LAN Interface

Setting the Internet Parameters

Setting the User Parameters for the LAN Interface

Depending on how the DP-2500/3000 will be configured to communicate on the LAN, the appropriate parameters listed in the table below must be stored first. (See pages 12 to 17)

	Parameter	Comments
1	DATE & TIME	Current Date and Time.
2	LOGO	Up to 25 characters & digits.
3	CHARACTER ID	Up to 16 characters & digits.
4	ID NO.	Your Fax Telephone Number. (Up to 20 digits)
5	TIME ZONE	The Time Zone is required as part of the Email header information when
		sending Internet faxes.
6	(MAC ADDRESS)	Hardware Address hard-coded into the DP-2500/3000. (If required, can be
		obtained from the 2nd page of the Fax Parameter List printout, by pressing.
		[FUNCTION][PRINT OUT][04 FAX PARAMETER LIST])
7*	IP ADDRESS	IP Address assigned to your DP-2500/3000.
8*	SUBNET MASK	Subnet Mask assigned by the Network Administrator.
9*	SMTP SERVER NAME	The name of the SMTP Mail Server. (Up to 60 characters)
10*	SMTP SERVER IP ADDR	IP Address of the SMTP Mail Server.
11*	DEF. ROUTER IP ADDR	IP Address of your Default Router.
12*	EMAIL ADDRESS	The Email Address assigned to your DP-2500/3000 for sending and receiving.
		(Up to 60 characters)
13*	DNS SERVER IP ADDRESS	IP Address of the DNS Server. If the DNS Server is not available, change the
		setting of the Fax Parameter No. 161 (DNS SERVER) to "Invalid", then enter
		the IP Address instead.
14*	POP SERVER NAME	Name of the POP Mail Server.
15*	POP SERVER IP ADDR	IP Address of the POP Mail Server.
16*	POP USER NAME	User Name assigned to your DP-2500/3000. (Up to 40 characters)
17*	POP PASSWORD	Password assigned to your DP-2500/3000. (Up to 10 characters)
18*	HOST NAME	The Host Name assigned to your DP-2500/3000. (Up to 60 characters)
19	DEFAULT SUBJECT	The default information to be added to the Subject Line for all outgoing Email
		(up to 40 characters). To manually input this information before transmission,
		change the Fax Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
20	DEFAULT DOMAIN	When the outgoing email address is incomplete by SMTP standards, the
		Frequently Sent Domain specified here will be automatically added to the
		email address. This feature is also useful as a shortcut when manually
		entering email addresses to a frequently used Domain. (Up to 50 characters)
21	SELECTABLE DOMAINS	Enter up to 10 Domain Names that can be selected during Manual email
		addressing by pressing the Domain Key	(See page 16). (Up to 30
		characters)
22	REMOTE PASSWORD	This is a security password that allows Remote Programming of the Internet
		Parameters and Auto Dialer or the retrieval of the Journal via an Email. (Up to
		10 characters)
23	MANAGER’S EMAIL ADDR	Department Manager’s Email Address for notification of all Internet relayed
		transmissions for supervision and cost control purposes. (Up to 60 characters)
24	RELAY XMT PASSWORD	A password that provides Network security for your Relay Station (used
		exclusively for G3 relay purposes). (Up to 10 characters)

25RELAY DOMAIN (01) ~ (10) Enter up to 10 Domain Name(s) that have been authorized to access your Internet Fax for Relayed XMT Request. (Up to 30 characters)

Relay Domain, a.k.a. Domain Name in the DX-1000/2000.

*Contact your Network Administrator for this Information.

INSTALLING YOUR MACHINE

27