Panasonic 3000 warranty Selection feature see

Programming or Retrieving Parameters via Email

Explanation of Contents

(1) To	: The DP-2500/3000’s email address
From	: This field is normally not visible when creating new email message(s). It is your default
	email address for retrieving the Internet Parameters and for error message notification.
	(Can be programmed with the configuration tool of your email program.)
Subject	: To Store data, type: #set parameters(password)#
(2) @sender to @end	: Defines the Sender information to be set in section (2) between @sender to @end block.
	Edit, Delete or Register up to 24 User Names and their Email Addresses for the Sender
	Selection feature (see page 83).
	Separate each data field with a semicolon (;). (If the remaining fields are to remain blank,
	insert a semicolon (;) for each blank field).
	The data string for each Sender Selection should be defined within a single line. The
	syntax is:
	<Sender Selection Number>;<User Name>;<Email Address>
	(a) 01 to 24: Indicates the Sender Selection Numbers
	(b) User Name (25-characters maximum)
	(c) Email Address (60-characters maximum)
(3) @select-domain to @end	: Defines the Selectable Domains to be set in section (3) between @select-domain to
	@end block. Register up to 10 alternate Domain Names that can be selected during
	manual email addressing by pressing the Domain Key	. (30-characters maximum)
	The syntax is: <Number>;<Domain>
(4) @relay-domain to @end	: Defines the Domain Names to be set in section (4) between @domain to @end block.
	Register up to 10 the Domain Names that have been authorized to access your Internet
	Fax for Relayed XMT Request. (30-characters maximum)
(5) @system to @end	: Defines the Internet Parameters to be set in section (5) between @system to @end
	block. Register the following Internet Parameters.
	(a) Default Domain (30-characters maximum).
	The syntax is: domain; <Default domain name>
	(b) Manager’s Email Address (60-characters maximum).
	The syntax is: manager; <Manager’s Email Address>
	(c) Relay XMT Password (10-characters maximum. The syntax is: relay; <Relay XMT
	Password>. Quotation marks " " enclosing the password, are required, as shown in
	the example above).
	(d) Remote Password (10-characters maximum. The syntax is: remote; <Remote
	Password>. Quotation marks " " enclosing the password, are required, as shown in
	the example above).
	(Notice that for the above example, we have changed the Manager’s Email Address,
	Relay XMT Password and the Remote Password).
(6)	: This header must be deleted before the email is sent to the DP-2500/3000 for
	reprogramming of Internet Parameters.
	The information following the "#" sign is ignored by the DP-2500/3000, therefore, you can
	leave it as is or delete it if you wish.

INSTALLING YOUR MACHINE

35