Panasonic 3000 warranty Duplex Print

Customizing Your Machine

No.	Parameter	Setting	Setting		Comments
		Number
088	LINE SELECTION	*1	Auto	Setting the home position for the Telephone Line selection.
	(See Note 4)
				Auto : Selects the available telephone line for transmission
		2	Line 1
				automatically.
				Line 1: Selects this as the default telephone line, unless manually
				selecting an alternate phone line.
		3	Line 2
				Line 2: Selects this as the default telephone line, unless manually
				selecting an alternate phone line.
089	LIST OUTPUT TRAY	*1	Inner 1	Selecting the Output Tray home position for List printout.
		2	Inner 2	Inner 1 : The List printout exits to the Bottom Output Tray.
		3	Outer	Inner 2 : The List printout exits to the Upper Output Tray (Blue).
095	DUPLEX PRINT	*1	Invalid	Selecting whether the machine performs duplex print.
		2	Valid
097	SPECIAL TRAY	*1	None	Select up to 3 Special Trays that will not be used for printing
	No. 1 - 3			received faxes (4-Tray configuration). One Tray must always be
		2	Tray 1
				available for receiving faxes.
		3	Tray 2	(You can specify one Tray (1 ~ 4) for each selection No. 1, No. 2
				and/or No. 3)
		4	Tray 3
		5	Tray 4
099	MEMORY SIZE	-	-	Displays the amount of base and optional memory installed.
	(Flash Memory)			(Base Memory + Optional Memory)
140	LAN RELAY XMT	*1	Invalid	Selecting whether the machine performs LAN Relay XMT
	REQUEST			Request.
		2	Valid
141	LAN XMT REDUCTION	*1	Invalid	Selecting whether to automatically reduce from LEDGER / B4 to
				A4, when LEDGER / B4 documents are transmitted via LAN.
				Invalid : No reduction
		2	Valid
				Valid : Automatic reduction from LEDGER / B4 to A4
142	RELAY XMT	1	Invalid	Selecting whether the machine accepts and performs G3 relayed
	(a.k.a. LAN RELAY			transmission. (Relay Station Functions)
		*2	Valid
	STATION on UF-770i)
143	RELAY XMT REPORT	1	Off	Setting how the COMM. Journal for relayed transmission is sent to
				the originator.
		*2	Always	Off	: Don’t send.
				Always	: Always send.
		3	Inc. Only
				Inc. Only: Send only if communication has failed.
144	EMAIL CHARACTER	1	Japanese	Selecting the Character Set when receiving or sending email text.
	SET
		*2	English
145	SENDER SELECTION	*1	Invalid	Selecting a pre-programmed sender’s name and email address
				before each transmission. (See page 83)
		2	Valid
146	POP TIMER	--	0 to 60 min.	Setting the time interval for the machine to check for email on the
				POP Server.
		3	*3 min.
				(0 = Does not check the POP Server for email. )
147	AUTO POP RCV	1	Invalid	Selecting whether the machine automatically downloads an email
				from the POP Server.
		*2	Valid
148	DELETE POP RCV	1	Invalid	Selecting whether the email will be deleted automatically after
	EMAIL			retrieval from the POP Server.
		*2	Valid

56