Cisco Systems Understanding the Show Diag Cisco Command and Its Application on WAE 7300

show diag

show diag

To display hardware and diagnostic information for a networking device, a line card, a processor, a jacket card, a chassis, or a network module, use the show diag command in privileged EXEC configuration mode.

				show diag [slot]
Syntax Description				slot	(Optional) Slot number of the interface. If a slot number is not specified,
					diagnostic information for all slots is displayed.
Defaults				None
				Privileged EXEC
Command History				Release	Modification
				11.1CA	This command was introduced.
			11.2		This command was integrated into IOS Release 11.2.
				11.2P	This command output was modified for the PA-12E/2FE port adapter, PA-E3
					port adapter, and PA-T3 port adapter.
				11.2GS	This command was implemented on the 12000 series Gigabit Switch Routers
					(GSRs).
				11.3 XA	This command was integrated in IOS Release 11.3 XA.
			12.0		This command was implemented on the AS5300.
				12.0(5)XQ	This command was implemented on the 1750 router.
				12.0(7)T	This command was integrated into IOS Release 12.0(7)T.
				12.1(9)EX	This command was introduced on the 7300 series routers, and the slot argument
					and chassis keyword were added.
				12.1(10)EX	This command was enhanced to display information about Field-Programmable
					Gate Array (FPGA) image versions on installed NSEs and line cards on 7304
					routers.
				12.2(11)YZ	Support was added for the 7300-CC-PA.
				12.2(8)T	This command was implemented for AIC and WIC cards on the 2600 series
					routers and the 3600 series routers.
				12.2(13)T	This command was implemented for the AIM-VPN/EPII and AIM-VPN/HPII
					cards on the 2691, 3660, 3725, and 3745 routers.
				12.2(15)ZJ	2611XM, 2620XM, 2621XM, 2650XM, and 2651XM routers.
				12.2(18)S	This command was integrated into IOS Release 12.2(18)S and implemented on
					the 7304 router.
				12.3(4)T	Support for the AIM-VPN/BPII card on the 2600XM series was integrated into
					IOS Release 12.3(4)T.
				12.2(20)S2	This command was integrated into IOS Release 12.2(20)S2 and the
					subslot slot/subslot keyword and arguments were added to support SPAs on the
					7304 router.
		Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments
	30				OL-13140-02