Cisco Systems NME-WAE manual Shutdown, CF card

Cisco WAE Network Module Hardware Description

Figure 1	NME-WAE Faceplate and LEDs
	NM-WAE-XXX-K9
	XXX-XXXXX-XX XX
SHUTDOWN:	Never remove compact
	flash during operation	LINK	ACT
GRACEFUL <1 s
IMMEDIATE >4 s
			DISK SYS
CF			GigE
CF	CF card	LINK	ACT DISK
Shutdown			SYS

Shut down application

before removing or power cycling.

NOT

SUPPORTED EN

USB

EN

170900

CF	Not used
Shutdown	Press the Shutdown button for greater than 4 seconds to cause an immediate module
	shutdown, which may impact file operations that are in progress.
CF card	CompactFlash memory card
LINK	Status of Gigabit Ethernet link
	On—Link is enabled
	Off—Link is disabled
ACT	Status of Gigabit Ethernet activity
	On—Active
	Off—Inactive
DISK	Status of hard drive activity
	On—Active
	Off—Inactive
SYS	Status of system shutdown
	On—System is shut down and ready for host power down
	Off—Application is stable
	Flashing—System shutdown is in progress
EN	Status of the network module
	On—Detected by the host IOS software and enabled
	Off—Disabled

Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments

4 OL-13140-02