Cisco Systems NME-WAE manual Service-module integrated-service-engine shutdown

service-module integrated-service-engine shutdown

service-module integrated-service-engine shutdown

To gracefully shut down an integrated-service-engine (ISE) network module, use the service-moduleintegrated-service-engine shutdown command in privileged EXEC mode.

service-module integrated-service-engine slot/unit shutdown

Syntax Description	slot	Slot number of the network module in the router chassis.
	/unit	Number of the daughter card on the network module. For ISE network
		modules, always use 0. The slash mark (/) is required between the slot
		argument and the unit argument.

Defaults

Command Modes

Command History

None

Privileged EXEC

ReleaseModification

12.4(9)T This command was introduced for ISE network modules.

Usage Guidelines	At the confirmation prompt, press Enter to confirm the action or n to cancel.
	The service-module integrated-service-engine shutdown command shuts down the operating system
	of the specified integrated-service-engine network module in an orderly fashion to protect the hard drive.
	When the operating system has been shut down, the module can be removed from the router, if necessary.
Examples	The following example gracefully shuts down the ISE network module in slot 1:
	Router# service-module integrated-service-engine 1/0 shutdown
	Shutdown is used for Online removal of Service Module.
	Do you want to proceed with shutdown?[confirm]
	Use service module reset command to recover from shutdown.
Related Commands	Command	Description
	interface integrated-service-engine	Configures an interface for ISE network modules and enters
		interface configuration mode.
	service-module	Performs a graceful shutdown and reboot of an ISE network
	integrated-service-engine reload	module ACNS operating system.
	service-module	Resets the hardware on ISE network modules.
	integrated-service-engine reset

Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments

OL-13140-02 23