Cisco Systems NME-WAE manual Service-module integrated-service-engine reload, Usage Guidelines

service-module integrated-service-engine reload

service-module integrated-service-engine reload

To perform a graceful shutdown and reboot of the integrated-service-engine (ISE) network module ACNS operating system, use the service-moduleintegrated-service-engine reload command in privileged EXEC mode.

service-module integrated-service-engine slot/unit reload

Syntax Description	slot	Slot number of the network module in the router chassis.
	/unit	Number of the daughter card on the network module. For ISE network
		modules, always use 0. The slash mark (/) is required between the slot
		argument and the unit argument.

Defaults

Command Modes

Command History

None

Privileged EXEC

ReleaseModification

12.4(9)T This command was introduced for ISE network modules.

Usage Guidelines	At the confirmation prompt, press Enter to confirm the action or n to cancel.
Examples	The following example gracefully shuts down and reboots the ISE network module ACNS operating
	system in slot 1:
	Router# service-module integrated-service-engine 1/0 reload
	Do you want to proceed with reload?[confirm]
Related Commands	Command	Description
	interface integrated-service-engineConfigures an interface for ISE network modules and enters
		interface configuration mode.
	service-module	Resets the hardware on ISE network modules.
	integrated-service-engine reset

service-module integrated-service-engine shutdown

Gracefully shuts down ISE network modules.

		show diag	Displays controller information for ISE network modules.
		show interfaces	Displays basic interface configuration information for ISE
		integrated-service-engine	network modules.
	Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments
18			OL-13140-02