Samsung DVR-16TH, DVR-4TH Normal PPS, Normal Qlty, Event Max PPS, Event Qlty, Event Active

User’s Manual

5.4.4.1Camera Select

This item is used to select a desired channel for setting the associated parameters. Move the cursor to <Camera Select> and press ENTER, then select a channel using UP / DOWN keys. Press ENTER again to confirm the setting.

5.4.4.2Normal PPS

Normal PPS (Picture per Second) is used to set the recording rate for normal status.

Please note that the total normal pps for all channels is limited under the maximum PPS for each Record mode. To increase one channel’s pps, you may have to reduce other’s first. Event pps is not restricted to this rule, since a smart event scheduler will handle the total pps automatically.

5.4.4.3Normal Qlty

This item is used to set the picture size for normal status recording. The available options are listed as follow: <Low>, <Fair>, <Mid>, <High> and <Best>.

5.4.4.4Event Max PPS

Event Max PPS is used to set the event recording rate for Event status. Normally, the Event PPS is set to be equal to or greater than Normal PPS; the setting depends on your application. If the Event PPS is set to <0>, the DVR-4TH/ 8TH/ 16TH series unit stops recording event video during alarms.

5.4.4.5Event Qlty

This item is used to set the picture size for event status recording. Refer to previous section Normal Qlty for the available options.

5.4.4.6Event Active

Users are allowed to choose which alarm type needs to be recorded. The available options are <Alarm> (alarm events), <Motion> (motion detection events), <Both> (alarm event + motion detection), and <None> (no events active). The default setting is <Both>, which includes Alarm and Motion event recording.

102	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10