
User’s Manual
From the System Setup menu, select <Network Setup> and press ENTER. The following menu displays. Items in this menu are described in the following sections.
| Network Setup |
LAN Select | LAN |
LAN Setup |
|
Modem Setup | 100 |
Trigger Port | |
Email Address |
|
SMTP Setup |
|
DDNS Setup |
|
UPnP Setup |
|
5.1.7.1LAN Select
PPPoE stands for
This item allows you to select your service type between <LAN>, <PPPoE> or <None>; if you are using an intranet for communication, please select <LAN>, if you are using a broadband medium, such as DSL Line or cable modem, please select <PPPoE>.
If <None> is selected, then there is no need to set further LAN setting, therefore, the second item <LAN Setup> will not be accessible.
5.1.7.2LAN Setup
The network related settings in the LAN Setup menu should be associated with the network service type. If you select <LAN> for <LAN Select>, then 6th to 8th item will not be available. Select <LAN Setup> in Network Setup menu and press ENTER for setting the parameters; the menu displays as follows.
| LAN Setup |
DHCP | OFF |
IP | 192.168.1.150 |
Netmask | 255.255.255.0 |
Gateway | 192.168.1.1 |
DNS | 0.0.0.0 |
PPPoE Account |
|
PPPoE Password | 35min |
PPPoE Max Idle | |
Connect At Booting | Yes |
Network Restart | No |
70 | |
| SPECO TECHNOLOGIES 07/10 |