
User’s Manual
5.1.7.3Modem Setup
The DVR-4TH/ 8TH/ 16TH series unit can connect to the internet via an external installed modem.
| Modem Setup |
Dial-in Setup | |
Dial-out Setup | |
Dial Port Selection | NONE |
Dial-in Setup
The Dial-in function enables the user to establish dial-up modem communication to and from the DVR-4TH/ 8TH/ 16TH series unit for remote software use. The user is allowed to connect only one modem to a DVR-4TH/ 8TH/ 16TH series unit.
For more information on dial-up setting on PC, see appendix Dial-up Connections via Modem.
NOTE: The Dial-in Service is not available if there is no modem connected to the unit.
In Network Setup menu, select <Dial-in Setup> and press ENTER to enter the Dial-in menu. The menu displays as follows.
| Dial-in Setup | | | |
Dial-in Service | | | OFF |
Dial-in Account | | | User |
Dial-in Password | | XXXX |
Server IP | 192.168. | 0. | 1 |
Client IP | 192.168. | 0. | 2 |
Dial-in Idle Time | | 0 | Min |
Dial-in Max Time | | 0 | Min |
Dial-in Service
If the DVR-4TH/ 8TH/ 16TH series unit does not connect to the Internet, the user can communicate to the unit from a remote PC through a modem as well. Select <ON> to enable the Dial-in function, or <OFF> to disable.
Dial-in Account
This item enables user to protect access to the unit by establishing or changing a dial-in user name for modem connection.
74 | DVR-4TH/8TH/16TH Series |
| SPECO TECHNOLOGIES 07/10 |