Samsung DVR-16TH, DVR-4TH, DVR-8TH user manual Per Camera Configuration, Record Event Video Only

User’s Manual

3.7.4Per Camera Configuration

This function is used to set the Day/ Night/ Weekend PPS (Picture per Second) and Quality for each channel. The Preset Configuration must be set to <OFF> for accessing these schedules. The menu displays as follows: (Record Mode: 352×240@240PPS in NTSC/ 352×288@200PPS in PAL).

	Per Camera Config
Cameral Select			CH1
	Day	Night	Weekend
Normal PPS	7.5	7.5	7.5
Normal Qlty	Best	Best	Best
Event Max PPS	30	30	30
Event Qlty	Best	Best	Best
Event Act	Both	Both	Both

•First, select a Camera to set its record configuration. The image and record settings from the selected camera will be displayed on the screen.

•Move the cursor using the Direction keys and press ENTER to select an item.

•Change the value using UP/ DOWN keys.

•Press ENTER to confirm the settings or ESC to abort.

•Press ESC to return to Record Setup menu.

Please note that the total normal pps for all channels cannot exceed 240 NTSC (352×240@240PPS)/ 200 PAL (352×288@200PPS). To increase one channel’s pps, you may have to reduce other’s first. Event pps is not restricted to this rule, since a smart event schedule will correct the total pps automatically..

3.7.5Record Event Video Only

If you want your DVR unit to start recording only under the alarm is triggered, follow the steps:

•Enter the OSD setup menu with a proper account.

•In the OSD setup menu, select <Record Setup> menu. Move the cursor to the item <Preset Config>, and select <Event only>.

Refer to section Preset Record Configuration for more detailed information.

36	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10