User’s Manual
5.1.2Language
The Language item allows the user to select the language for the OSD menu and screen messages. Language selection takes effect immediately when the selection is done. Press UP / DOWN to select from languages listed and press ENTER to confirm.
5.1.3Date / Time
The user can set the current date, time and other OSD parameters in this menu. The login account should have authority to access the System Setup menu. In the System Setup menu, select <Date/Time> and press ENTER; the Date/Time menu displays as follows.
Date/Time |
|
Date | 2008/02/21 |
Time | 10:39:26 |
Time Zone | Off |
Date/Time Display | 1 Row |
Date Display Mode | Y/M/D |
Time Display Mode | 24 HR |
Daylight Saving Time Setup |
|
Network Time Protocol Setup |
|
NOTE: The reset date/ time setting applies only to future recorded video, the date and time of previously recorded video will not be changed.
NOTE: After the Date/Time setting is changed, clearing the database is recommended for avoiding record database corruption.
5.1.3.1Date / Time
Select <Date> or <Time> and press ENTER to adjust the settings. LEFT / RIGHT keys are used to move the cursor to previous or next field, ENTER is for selecting, and UP / DOWN are used to change the value in the selected field.
64 | |
| SPECO TECHNOLOGIES 07/10 |
