Samsung DVR-16TH, DVR-4TH, DVR-8TH user manual IP Camera Setting, Network Time Protocol Setup

User’s Manual

3.5.3Network Time Protocol Setup

This section guides you to synchronize your unit to fit the local time.

Go the <System Setup> Æ <Date/ Time> Æ <Time Zone>. Refer to below figure and select your time zone from the options.

Then go to <System Setup> Æ <Date/ Time> Æ <Network Time Protocol Setup> and select <ON> for the item <Automatically Time Sync>. When this function is ON, time sync will be performed every hour in order to observe correct time of your local zone.

NOTE: If you want the unit to automatically synchronize the local time, the <Time Zone> item MUST NOT be set to <OFF>, or the function cannot be activated.

3.6IP Camera Setting

The distinctive hybrid solution of the DVR enables users to connect IP camera(s) while others are analog cameras. First enter the OSD setup menu with a proper account and access <System Setup> Æ <IP Camera Support> to select the number of IP cameras to be connected. The supported channels of IP cameras will be from the largest numbers, for example CH16 for 16ch models.

30	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10