User’s Manual
5.5Sequence Setup
The Sequence Setup menu allows the user to set the camera sequence schedule and dwell time for main and call monitor. Select <Sequence Setup> in Main menu and press ENTER; the menu displays as follows. Items in the Sequence Setup menu are described in the following subsections.
Sequence Setup |
|
Main Monitor Dwell | 5 Sec |
Main Monitor Schedule |
|
Call Monitor Dwell | 5 Sec |
Call Monitor Schedule |
|
5.5.1Main / Call Monitor Dwell
The Main / Call Monitor can be set to display full screen video for all installed cameras in sequence. This item is used to set the Main / Call Monitor dwell time, which is the amount of time elapsed between switching images. The dwell time has an available range of 1 to 120 seconds.
5.5.2Main / Call Monitor Schedule
This item is used to set the Main / Call Monitor camera sequence in full screen format. Move the cursor to <Main Monitor Schedule> and press ENTER; the menu is displayed as follows.
Main Monitor Schedule
01►02►03►04►05►06►07►08► 09►10►11►12►13►14►15►16
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16 Back 
OK 
Cancel
Follow these steps to set a sequence:
•Press LEFT direction key to delete the original setting.
•Press the desired Channel keys to assign a camera to that location in the sequence.
•Continue the steps until the sequence is completed.
A sequence can have up to 16 entries. The user can select fewer than 16 entries for a camera sequence and leave the remaining entries blank. The sequence can include a specific camera or cameras multiple times.
107 | |
SPECO TECHNOLOGIES 07/10 |
|
