User’s Manual
NOTE: The current number of connected cameras will affect the recording quality which wil be automatically calculated through the <ezRecord Setup>. Therefore, once you disconnect cameras or connect more cameras to the unit, you should reset the <ezRecord Setup>.
5.4.6Data Lifetime Setup
Data Lifetime indicates the duration that a video is saved and recallable in the HDD. Only those video recorded within Data Lifetime can be displayed on the screen and played back. The video exceeded Data Lifetime will be hidden and cannot be retrieved for playback.
Data Lifetime Setup |
|
Data Lifetime Mode | General |
Data Lifetime | 0 Days |
Data Lifetime By Day |
|
Data Lifetime By Channel |
|
NOTE: To playback a video exceeding the data lifetime, please extend the duration until the recording data / time of the video is included.
5.4.6.1Data Lifetime Mode
This item allows the user to choose preferred data lifetime mode. There are three types of data lifetime mode: General, By Day, and By Channel. When a specific mode is selected, the other two will be grayed out and cannot be accessed.
5.4.6.2Data Lifetime
When data lifetime mode is set as <General>, this item will be accessible. Press ENTER to select this item and press UP / DOWN keys to set the data lifetime. The value ranges from <1> to <365> days. Alternatively, select <0> to disable this function.
5.4.6.3Data Lifetime By Day
When data lifetime mode is set as <By Day>, this item will be accessible. Enter this menu and the user can setup data lifetime of each weekday independently. The value ranges from <1> to <365> days. Alternatively, select <0> to disable this function.
104 | |
| SPECO TECHNOLOGIES 07/10 |
