Liebert UPS System user manual Address setup, Time setup

Chapter 5 Operation of Display Panel

5.3.2 Address setup

According to the information displayed on Fig.5-22, select the “Equipment Address Setup” and pressing F3(UP) or F2(DOWN) to modify the address of the equipment, and then pressing F4 to confirm and exit. If you do not want to modify the language, pressing F1(ESC) to escape.

UL33-0400L 2001-11-08					12:50:30
Inv. On		Units	2/4		ID: 1
Out		Language			Chinese
Local		Chinese		English		c
System		Com. Adress Set			1
Battery		1
Records	Date & Time Set
Settings		2001£ -11£ -08 12:50:30
Input Breaker Closed 11£ -08 12:09
Byp. Breaker Closed 11£ -08 12:09
Mains Volt. Abnormal			11£ -08 12:28			ok
UPS in Battery Mode			11£ -08 12:28
Battery low			11£ -08 12:50

Fig. 5-22 Equipment address

5.3.3 Time setup

According to the information displayed on the Fig.5-23, select the “Time Setup” to modify the system time. If you do not want to modify the language, pressing F1(ESC) to escape.

UL33-0400L 2001-11-08				12:50:30
Inv. On	Units	2/4		ID: 1
Out	Language			Chinese
Local	Chinese		English		c
System	Com. Adress Set			1
Battery	1
Records Date & Time Set
Settings	2001£ -11£ -08 12:50:30
Input Breaker Closed 11£ -08				12:09
Byp. Breaker Closed 11£ -08				12:09
Mains Volt. Abnormal		11£ -08		12:28	ok
UPS in Battery Mode		11£ -08		12:28
Battery low		11£ -08		12:50

Fig. 5-23 Setup the date

Suppose the time is 2001-11-09 12:50:20, pressing F2 (move left) and F3 (move right) keys to move the cursor to the location of date, as shown in Fig. 5-24.

55