Liebert UPS System Snmp Card and the Software, Product structure and ports, Technical features

Chapter 9 Optional Parts

provided by battery manufacturer. The battery output circuit breaker should be made separately. The method is used if the required backup time is longer than

2 hours.

l.The connection cables between battery and UPS will not be provided in accessories. Refer to Table 3-2 in Chapter 3 to select the battery cables.

9.3SNMP Card and the Software

UPS SNMP card UF-SNMP111 is inserted into the slot for SNMP card in the UPS. The card enables the remote management of the UPS via network.

SNMP card is compatible with 10M/100M ether net and support the SNMP, HTTP, TFTP, TELNET and TTY protocols. The immunity satisfies the IEC 1000-4-2.3.4 LEVER III . The conduction of radiation satisfies CISPR 22 CLASS A standard. Hot swappable design enables quick and convenient maintenance. It can access to network management system via MIB, and is able to monitor the UPS via IE. It is also a part of centralized monitoring system.

9.3.1 Product structure and ports

Fig.9-5 SNMP structure

The ports and functions of SNMP card are given in Table 9-4.

Table 9-3 Ports and functions of SNMP card

Serial No.	Name		Functions
1	RJ45 port		Connect to network cables
2	Status indicator(green)	Indicate the operation states of SNMP card
3	Network indicator(yellow)	Indicate the network connection and communication
			status
4	SNMP card		Inserted into UPS and used for UPS connection

9.3.2 Technical features

Compatible with 10/100M either net, the SNMP card can adapt to 10M and 100M ether net automatically and can realize the smooth connection from 10M to 100M;

106