Chapter 2 Cabinet Installation

Chapter 2 Cabinet Installation

2.1 Environmental Conditions

Operating Temperature : 0~ 40°C

Storage Temperature: -40~70°C(with no battery)

-20~55°C(with battery)

Relative Humidity:5%~95%, no condensation

Cooling method : Fan cooling

Elevation:1500m

Maximum Tilt : 5 degrees

Pollution :Class II

The UPS should be installed in a cool place with good ventilation, low humidity and free of dust. The recommended operating temperature is 20 – 25 degree C, and the humidity should be controlled at 50% RH.

Note :

The UPS room should not be stored with flammable, corrosive or explosive materials. It is not advisable to install the UPS in areas with conductive dust.

2.2 Unpacking

Unpack the UPS only at the installation site and check the equipment for completeness and damage. Keep accessories for later use.

Unpacking method is illustrated on the carton. For reliable operation of the UPS, the installation method should be based on the actual environment condition and site design standard.

2.3 Dimensions

The dimensions of the UPS are listed in Table 2-1

13

Page 19
Image 19
Liebert UPS System user manual Environmental Conditions, Unpacking, Dimensions