Liebert UPS System user manual UPS Events

Chapter 5 Operation of Display Panel

		Table 5-3 UPS Events
No.	Event	Reason
1	Start through keypad	The user presses down the inverter start key, the system will
		start inverter
2	Start through keypad failed	The user presses down the inverter start key, the system
		can’t start inverter
3	Shutdown through keypad	The user presses down the inverter stop key
4	Emergency shutdown	The user presses down the emergency shutdown key
5	Fault clear	The user presses down the fault clear key
6	Manual mute	When the system is in alarm state, the user presses down
		the mute key
7	Manual mute cancel	When the system is in mute state, the user presses down
		the mute key
8	Confirm the interrupted	When the system displays the prompt window to require the
	transfer	user to confirm, the user presses the “Enter” key
9	Single UPS shutdown	When the system displays the prompt window to require the
	confirmation	user to confirm, the user presses the “Enter” key
10	Parallel operation system	When the system displays the prompt window to require the
	shutdown confirmation	user to confirm, the user presses the “Enter” key
11	Manual battery self-test	In function setting menu, the user selects the “Manual
		battery self-test”
12	Stop battery self-test manually	In function setting menu, the user selects the “Stop battery
		self-test manually”

Note: If the same event occurs once again, it will be displayed on the current event and alarm display window according to the time sequence. The last event will become the history log and will disappear from the current event and alarm display window, and this event can be found in history log. So, only the event that occurs most recently can be displayed in the current event and alarm display window.

67