Display Configuration 9300 Series User’s Guide
Page 50 Chapter 3 - Default Meter Functionality
Display Configuration
The meter’s front panel display is controlled by two types of ION modules: the
Display Options module and Display modules. Display modules determine the
form and content of each display screen, and the Display Options module controls
options such as decimal format, daylight savings time display, and backlight
timeout.
There are eight display screens which are all factory-configured. (An existing
display must be changed if you want a custom display.) The default displays are
as follows:
Display Options Module Settings
The Display Options module contains setup registers that hold data display
settings such as contrast level and backlight timeout. Settings in the Display
Options modules are global, and affect the entire set of front panel display screens.
Display Number Display Title Parameters shown
Display #1 kWh net kWh net
Display #2 kWh swd / mx kWh swd, kWh swd mx
Display #3 Volts Va, Vb, Vc
Display #4 Amps Ia, Ib, Ic
Display #5 Power kW tot, kVAR tot, kVA tot, PF sign tot
Display #6 Frequency Freq
Display #7 V-THD V1 Total HD, V2 Total HD, V3 Total HD
Display #8 I-THD I1 Total HD, I2 Total HD, I3 Total HD
Setup Register Function Default
Autoscroll Sets the number seconds that each screen is displayed before it flips to the next display
screen. Set to DISABLED to turn-off AutoScroll. Disabled
Backlight Timeout Sets the time that the front panel’s backlight stays on after the last press of a front
panel button. 1,800
Display Update Time Sets the period between data display refreshes 4
Display Mode Sets the display to show the four fixed mode display screens, or the eight programmable
display screens. Programmable