Siemens 9300, 9330, 9350 - page 51

9300 Series User’s Guide Display Configuration
Chapter 3 - Default Meter Functionality Page 51
Display Module Settings
The Display module’s setup registers determine the format that the Source data
will take on the front panel display. Depending on the display screen type, you can
use up to four Source links to a single Display module. Display modules have the
following setup registers:
The number of parameters you can have linked to the Source inputs depends on the
value of the Screen Type setup register. The supported options for the setup register
and the number of allowable Source inputs for each Screen Type setting are
described below.
Changing the Parameters that are Displayed
The meter’s default display configuration shows a comprehensive set of
parameters. Changing these parameters requires that you alter the links between
various ION modules. Complete details on configuring the front panel displays
are provided in the Custom Front Panel Displays technical note.
Setup Register Function
Screen Type Determines the display format (see table below)
Screen Type Setting Max Source inputs Display Description
One Parameter 1
Displays one to four values. The fewer
the values, the larger the values appear
on the display screen.
Two Pa ra met er 2
Three Parameter 3
Four Paramete r 4