The ACCESS Meter in an Enterprise Energy Management System 9300 Series User’s Guide
Page 14 Chapter 1 - Introduction
The ACCESS Meter in an Enterprise Energy Management System
Applications that include the meter typically require additional equipment.
Display and analysis software tools are almost always used to manage, interpret
and distribute the data measured or logged by a meter. There are usually a variety
of tools used, and often these tools are connected using different communications
standards and protocols. In many cases, a meter must also provide control
capabilities and device-level data sharing.
The meter can adapt to many situations. Advanced communications allow data to
be shared simultaneously across multiple networks, built-in I/O provides
monitoring and control capabilities, and a variety of display and analysis tools can
be used to monitor your power system.

Data Display and Analysis Tools

Not only does the meter’s front panel allow meter configuration and data display,
but the meter also integrates seamlessly with display and analysis software
available from Siemens. WinPM.Net software is the network and device
configuration software that also lets you analyze and monitor your system and
produce reports for any department in an organization. Furthermore, you can use
data acquired by the meter in a variety of third-party systems. ACCESS software
is designed to make use of all the available advanced capabilities.
Power System Connections
Phase voltage and phase current
from Wye, Delta or single-phase
power systems.
I / O
- Energy Pulses
- Breaker Closures
- Digital Signals
- Analog Transducers
Protocols
- ION
- Modbus RTU
- DNP V3.00
- Profibus (9300)
Communications
- RS-485
- Optical Infrared
- 10 Base-T Ethernet
- 33.6 kbps internal modem
- Profibus port (9300)
Data Analysis Tools
- WinPM.Net Software
- 3rd-Party tools
On-Site Data Display
- Remote Modular Display
Remote Data Display
- Vista
- WebReach
Corporate Network
Internet Connectivity
- MeterM@il
- WebMeter