Clear Functions Menu 9300 Series User’s Guide
Page 28 Chapter 2 - Using The Front Panel

Editing Registers

To edit the value of a register, navigate the registers using the arrow keys until the
register you want is highlighted, then press the round button. The register appears
in one of two ways: as a number, or as an option selected from a menu. Once you
have entered the password (if required), a YES or NO verification screen appears
showing the new value of the register. Select YES to change the value of the setup
register; select NO to return to the previous screen without changing the value.
Numeric Registers
Use the arrow buttons to change the value of the digit above the cursor.
Change the position of the cursor by holding down an arrow key for about one
second. Holding the up arrow button moves the cursor left one position, and
holding the right arrow button moves the cursor right one position. Once you have
the value you want, press the round button.
Enumerated Registers
Some registers are displayed as a menu of options. The current value of the register
will be displayed in the list with an asterix (*) on either side of it. Use the arrow
buttons to highlight the setting you want, and press the round button.

Front Panel Password Security

The password is required when you make a change to a register through the front
panel. Once you have entered a valid password, you can make multiple register
changes. The password is factory set at ‘00000’ (5 zeros). Press the round button
when you have entered the correct front panel password. If you need to change the
password, refer to the section “Security Menu” on page35.
Clear Functions Menu
The CLEAR FUNCTIONS menu allows you to reset cumulative parameters. To access
the Clear Functions screen, press the round button while the meter is displaying
data; scroll down the Setup menu and select CLEAR FUNCTIONS.
Peak Demand Reset
The following Demand parameters are reset when you select PEAK DMD RSET:
Maximum and Minimum Rolling (Sliding Window) Demand (kW, kVAR, kVA)
Maximum and Minimum Thermal Demand (kW, kVAR, kVA)
Min/Max Reset
The minimum and the maximum values for each the following parameters are reset
when you select MNMX RSET:
Phase and average Current
Line-to-line voltages
Line-to-neutral voltages
Frequency
PF lead and PF lag
Total kW, kVAR, kVA