Juniper Networks J2320 manual Displaying Basic Connectivity Configurations

Chapter 7: Establishing Basic Connectivity

Displaying Basic Connectivity Configurations

Purpose Verify the configuration of basic connectivity. Because the basic connectivity settings appear in different places in the configuration hierarchy, displaying the entire configuration at once makes viewing the settings easier.

Action From the J-Web interface, select

Configuration>View and Edit>View Configuration Text. Alternatively, from configuration mode in the CLI, enter the show command. The following sample output displays the sample values configured in Table 57 on page 146. Your output displays the values you set.

system { host-name routera;

domain-name lab.router.net; domain-search [ lab.router.net router.net ]; backup-router 192.168.2.44; time-zone America/Los_Angeles; root-authentication {

ssh-rsa "ssh-rsa AAAAB3Nza...D9Y2gXF9ac==root@routera.lab.router.net";

}

name-server { 10.148.2.32;

}

services {

}

ntp {

server 10.148.2.21;

}

}

interfaces { ge-0/0/0 {

unit 0 { family inet {

address 192.168.1.1/24;

}

}

}

lo0 { unit 0 {

family inet {

address 172.16.1.24/32;

}

}

}

}

What It Means The output shows the configuration of basic connectivity. Verify that the values displayed are correct for your Services Router.

See Also For more information about the format of a configuration file, see the J-series Services Router Basic LAN and WAN Access Configuration Guide.

Displaying Basic Connectivity Configurations ■ 149