Juniper Networks J2320 manual Deleting a License with the CLI, Saving License Keys with the CLI

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

1.Enter operational mode in the CLI.

2.Enter one of the following CLI commands:

■To add a license key from a file or URL, enter the following command, specifying the filename or the URL where the key is located:

request system license add filename url

■To add a license key from the terminal, enter the following command: request system license add terminal

3.When prompted, enter the license key, separating multiple license keys with a blank line.

If the license key you enter is invalid, an error is generated when you press Ctrl-D to exit license entry mode.

4.Go on to “Verifying J-series License Management” on page 167.

Deleting a License with the CLI

To delete a license key from the Services Router with the CLI:

1.Enter operational mode in the CLI.

2.Enter the following command for each license, specifying the license ID. You can delete only one license at a time.

request system license delete license-id

3.Go on to “Verifying J-series License Management” on page 167.

Saving License Keys with the CLI

To save the licenses installed on the Services Router to a file with the CLI:

1.Enter operational mode in the CLI.

2.To save the installed license keys to a file or URL, enter the following command:

request system license save filename url

For example, the following command saves the installed license keys to a file named license.config:

request system license save ftp://user@host/license.conf

3.Go on to “Verifying J-series License Management” on page 167.

166■ Managing J-series Licenses with the CLI