Juniper Networks J2320 manual Verifying Basic Connectivity, Ge-0/0/0

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Table 57: Configuring Basic Settings (continued)

Task	J-Web Configuration Editor
Define the IP address for	1.	In the configuration editor hierarchy, next to
ge-0/0/0.		Interfaces, click Configure or Edit.
	2.	In the Interface table, locate the ge-0/0/0row and
		click Unit.
	3.	In the Unit table, click 0, and in the Family section
		next to Inet, click Configure or Edit.
	4.	To delete the existing IP address, click the Discard
		button. Select the Delete Configuration Below This
		Point option button from the next display.
	5.	Next to Address, click Add new entry.
	6.	In the Source box, type the address and prefix length
		for the management interface—for example,
		192.168.1.1/24.
	7.	Click OK.

CLI Configuration Editor

1.Delete the existing IP address:

delete ge-0/0/0 unit 0 family inet address.

2.Set the IP address and prefix length of ge-0/0/0. For example:

set ge-0/0/0 unit 0 family inet address 192.168.1.1/24

Verifying Basic Connectivity

To verify that the Services Router has the settings you configured, perform the following task.

148■ Verifying Basic Connectivity