Juniper Networks J2320 manual TGM550 RJ-11 Connector Pinout for Analog Ports

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

NOTE: Two different RJ-45 cables and RJ-45 to DB-9 adapters are provided. Do not use the RJ-45 cable and adapter for the Services Router console port to connect to the TGM550 console port.

To connect the console port to an external management device, you need an RJ-45 to DB-9 serial port adapter, which is also supplied with the TGM550.

Table 87: TGM550 RJ-45 Console Connector Pinouts

TGM550 RJ-45
Pin	Signal	Terminal DB-9 Pins
1	For future use	NC
2	TXD (TGM550 input)	3
3	RXD (TGM550 output)	2
4	CD	4
5	GND	5
6	DTR	1
7	RTS	8
8	CTS	7

TGM550 RJ-11 Connector Pinout for Analog Ports

The two analog telephone ports and two analog trunk ports on the TGM550 use an RJ-11 cable. Table 88 on page 242 describes the TGM550 RJ-11 connector pinout.

Table 88: TGM550 RJ-11 Connector Pinout

PinSignal

1No connection

2No connection

3Ring

4Tip

5No connection

6No connection

242■ Connector Pinouts for Avaya VoIP Modules