Juniper Networks J2320 Task Web Configuration Editor CLI Configuration Editor, Set ntp server

Chapter 7: Establishing Basic Connectivity

Table 57: Configuring Basic Settings (continued)

Task	J-Web Configuration Editor		CLI Configuration Editor
Define the NTP server that	1.	In the Nested configuration section, next to Ntp, click	Set the address of the NTP server.
NTP requests can be sent		Configure or Edit.	For example:
to.	2.	Next to Server, click Add New Entry.
			set ntp server 10.148.2.21
	3.	In the Address box, type the NTP server's IP
		address—for example, 10.148.2.21
	4.	Click OK.
	5.	Click OK a second time to return to the System level
		in the configuration editor hierarchy.
Define the DNS server that	1.	Next to Name server, click Add New Entry.	Set the address of the DNS server.
receives DNS requests.	2.	In the Address box, type the address of the DNS	For example:
		server—for example, 10.148.2.32.	set name-server 10.148.2.32
	3.	Click OK.

Add each domain that the router belongs to.

1.	Next to Domain search, click Add New Entry.	Set the domains to be searched. For
2.	In the Value box, type the name of the domain in	example:

which the router is located—for example, lab.router.net.

set domain-search lab.router.net

3.Click OK.

4. Next to Domain search, click Add New Entry.

set domain-search router.net

5. In the Value box, type the name of another domain that the router belongs to—for example, router.net.

6.Click OK.

Define the backup router	In the Backup router section, next to Address, type the IP
to be used when the	address of the backup router—for example, 192.168.2.44.
router is booting or the
routing protocol processes
are not running.
Define the IP address for	1.	In the configuration editor hierarchy, next to
lo0.0.		Interfaces, click Configure or Edit.
	2.	In the Interface table, locate the lo0 row and click Unit.
	3.	In the Unit table, click 0, and in the Family section
		next to Inet, click Configure or Edit.
	4.	To delete the existing IP address, click the Discard
		button. Select the Delete Configuration Below This
		Point option button from the next display.
	5.	Next to Address, click Add new entry.
	6.	In the Source box, type the address and prefix length
		for the loopback interface—for example,
		172.16.1.24/32.
	7.	Click OK.

Set the address for the backup router. For example:

set backup router address 192.168.2.44

1.From the [edit] hierarchy level, enter

edit interfaces

2.Delete the existing IP address:

delete lo0 unit 0 family inet address

3.Set the IP address and prefix length of lo0.0. For example:

set lo0 unit 0 family inet address 172.16.1.24/32

Configuring Basic Settings with a Configuration Editor ■ 147