Juniper Networks J2320 manual Configuring the CLI Environment

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

user@host> set cli ?
Possible completions:
complete-on-space	Set whether typing space completes current word
directory	Set working directory
idle-timeout	Set maximum idle time before login session ends
prompt	Set CLI command prompt string
restart-on-upgrade	Set whether CLI prompts to restart after software upgrade
screen-length	Set number of lines on screen
screen-width	Set number of characters on a line
terminal	Set terminal type

Table 46 on page 96 shows how you can change the CLI environment features.

Table 46: Configuring the CLI Environment

Environment	CLI Command	Default Setting	Options
Feature
Command	set cli	on—Pressing Tab or Spacebar	■ Set off to allow only Tab for
completion	complete-on-space	completes a command.	command completion.
	(on off)		■ Set on to re-enable Tab and
			Spacebar for command
			completion.
Your working	set cli directory path8	/cf/var/home/remote	Replace path with the directory you want
directory			to enter when you log in to the Services
			Router.
Minutes of idle time	set cli idle-time	Your session never times out unless	■ To enable the timeout feature,
	minutes	your login class specifies a timeout.	replace timeout with a value
			between 1 and 100,000.
			■ To disable the timeout feature,
			replace timeout with 0.
Your session prompt	set cli prompt string	user@host>	Replace string with the prompt you
			want. If the prompt contains spaces or
			special characters, enclose string in
			quotation marks (“ “).

Restart-after-upgrade prompt

Number of CLI output line displayed at once

set cli restart-on-upgrade (on off)

set cli screen-length

length

CLI prompts you to restart the	■	Set off to disable the prompt for the
Services Router after a software		session.
upgrade.	■	Set on to reenable the prompt.
Variable (depends on terminal type).	■	To change the number of lines
		displayed on the screen, replace
		length with a value between 1 and
		100,000.

■ To disable the display of a set number of lines, replace length with 0. (This feature can be useful when you are issuing CLI commands from scripts.)

96■ Using the Command-Line Interface