Juniper Networks J2320 manual DC Power, Connection, and Power Cable Specifications

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Table 50 on page 108 lists AC power cord specifications provided for each country or region.

Table 50: AC Power Cord Specifications

Country	Electrical Specifications			Plug Standards
Australia	250	VAC, 10 A, 50 Hz		AS/NZ 3112–1993
China	250	VAC, 10 A, 50 Hz		GB2099.1 1996 and GB1002 1996 (CH1-10P)
Europe (except Italy and	250	VAC, 10 A, 50 Hz		CEE (7) VII
United Kingdom)
Italy	250	VAC, 10 A, 50	Hz	CEI 23–16/VII
Japan	125	VAC, 12 A, 50	Hz or 60 Hz	JIS 8303
North America	125	VAC, 10 A, 60	Hz	NEMA 5-15
United Kingdom	250	VAC, 10 A, 50	Hz	BS 1363A

Figure 51 on page 108 illustrates the plug on the power cord for each country or region listed in Table 50 on page 108.

Figure 51: AC Plug Types

NOTE: Power cords and cables must not block access to router components or drape where people might trip on them.

For information about the AC power supply, see “J2320 and J2350 Services Router Hardware Features” on page 13 and “J4350 and J6350 Services Router Hardware Features” on page 26.

To connect the power cord during initial installation, see “Connecting

Power” on page 122.

To replace the AC power cord, see “Replacing AC Power Supply Cords” on page 193 and “Replacing DC Power Supply Cables” on page 196.

DC Power, Connection, and Power Cable Specifications

Each DC power supply has a single DC input (–48 VDC and return) that requires a dedicated circuit breaker:

108■ Power Guidelines, Requirements, and Specifications