Juniper Networks J2320 manual Establishing Basic Connectivity, Basic Connectivity Terms

Chapter 7

Establishing Basic Connectivity

The JUNOS software is preinstalled on the Services Router. When the router is powered on, it is ready to be configured. If the router does not have a configuration from the factory or your service provider, you must configure the software to establish basic connectivity.

If you are setting up a Services Router for the first time, you can use either J-Web Quick Configuration or a configuration editor to configure basic connectivity. For a brief explanation of J-Web Quick Configuration and the J-Web and CLI configuration editors, see “Services Router User Interface Overview” on page 79.

If you are setting up many Services Routers, autoinstallation can help automate the configuration process. For more information about autoinstallation, see the J-series Services Router Administration Guide.

This chapter contains the following topics. For more information about basic connectivity, see the JUNOS System Basics Configuration Guide.

■Basic Connectivity Terms on page 129

■Basic Connectivity Overview on page 130

■Before You Begin on page 134

■Connecting to a Services Router on page 135

■Configuring Basic Settings with J-Web Quick Configuration on page 141

■Configuring Basic Settings with a Configuration Editor on page 145

■Verifying Basic Connectivity on page 148

Basic Connectivity Terms

Before configuring basic connectivity, become familiar with the terms defined in

Table 54 on page 129.

Table 54: Basic Connectivity Terms

Term	Definition
domain name	Name that identifies the network or subnetwork of a router.

Basic Connectivity Terms ■ 129