Juniper Networks J2320 manual Set Up Quick Configuration Summary, Field Function, Network

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Table 55: Set Up Quick Configuration Summary (continued)

Field	Function
Current System Time	Synchronizes the system time with the NTP
	server, or manually set the system time and
	date.

Network

Your Action

■To immediately set the time using the NTP server, click Set Time via NTP. The router sends a request to the NTP server and synchronizes the system time.

NOTE: If you are configuring other settings on this page, the router also synchronizes the system time using the NTP server when you click Apply or OK.

■To set the time manually, click Set Time Manually. A pop-up window allows you to select the current date and time from lists.

DNS Name Servers	Specify a DNS server that the router can use
	to resolve hostnames into addresses.

To add an IP address, type it in the box to the left of the Add button, then click Add.

To delete an IP address, click on it in the box above the Add button, then click Delete.

Domain Search	Adds each domain name that the router is
	included in to the configuration so that they
	are included in a DNS search.

To add a domain name, type it in the box to the left of the Add button, then click Add.

To delete a domain name, click on it in the box above the Add button, then click Delete.

Default Gateway	Defines a default gateway through which to	Type a 32-bit IP address, in dotted decimal notation.
	direct packets addressed to networks not
	explicitly listed in the routing table.

Loopback Address	Defines a reserved IP address that is always
	available on the router. If no address is
	entered, this address is set to 127.0.0.1/32.
ge-0/0/0 Address	Defines the IP address and prefix length of
	ge-0/0/0. The interface ge-0/0/0is typically
	used as the management interface for
	accessing the router. The DHCP client sets
	this address to 192.168.1.1/24 if no DHCP
	server is found.
Management Access

Type a 32-bit IP address and prefix length, in dotted decimal notation.

Type a 32-bit IP address and prefix length, in dotted decimal notation.

NOTE: You must enter the ge-0/0/0address on the Quick Configuration Set Up page before you click Apply or OK. If you do not manually configure this address, you will lose your connection to the J-Web interface when you click Apply or OK.

Allow Telnet Access	Allows remote access to the router using	To enable Telnet access, select the check box.
	Telnet.
Allow JUNOScript	Allows JUNOScript to access the router using	To enable JUNOScript access over clear text, select
over Clear-Text	a protocol for sending unencrypted text over	the check box.
Access	a TCP connection.
Allow SSH Access	Allows remote access to the router using SSH.	To enable SSH access, select the check box.

144■ Configuring Basic Settings with J-Web Quick Configuration