Juniper Networks J2320 manual Set Up Quick Configuration

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Figure 68: Set Up Quick Configuration Page

Before you configure the router, gather the information described in “Before You

Begin” on page 134.

To configure basic settings with J-Web Quick Configuration:

1.If you have not already done so, connect a management device to the ge-0/0/0interface on port 0/0. For instructions, see “Connecting to the J-Web Interface” on page 135.

2.If the Set Up Quick Configuration page is not displayed, select Configuration>Quick Configuration >Set Up.

3.Enter information into the Set Up Quick Configuration page, as described in Table 55 on page 143.

4.Click one of the following buttons:

■To apply the configuration and stay in the Set Up Quick Configuration page, click Apply.

■To apply the configuration and return to the Quick Configuration page, click OK.

142■ Configuring Basic Settings with J-Web Quick Configuration