Juniper Networks J2320 manual Displaying Installed Licenses

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Displaying Installed Licenses

Purpose Verify that the expected licenses are installed and active on the Services Router.

Action From the CLI, enter the show system license command.

user@router> show system license
License usage:
Licenses		Licenses	Licenses
Feature name	used	installed	needed
j-flow	0	1	0
bgp-reflection	0	1	0
dlsw	0	1	0
Licenses installed:
License identifier: G03000002223
State: valid
License version: 2
Valid for device: JN001875AB
Features:
bgp-reflection	- Border Gateway Protocol route reflection
License identifier: G03000002224
State: valid
License version: 2
Valid for device: JN001875AB
Features:
dlsw	- Data-Link Switching (DLSw) protocol
License identifier: G03000002225
State: valid
License version: 2
Valid for device: JN001875AB
Features:
j-flow	- J-FLOW traffic analysis (CFLOW reporting)

What It Means The output shows a list of the license usage and a list of the licenses installed on the Services Router. Verify the following information:

■Each license is present. Licenses are listed in ascending alphanumeric order by license ID.

■The state of each license is valid.

A state of invalid indicates that the license key is not a valid license key. Either it was entered incorrectly or it is not valid for the specific device.

■The feature for each license is the expected feature. The features enabled are listed by license. An all-inclusive license has All features listed.

■All configured features have the required licenses installed. The Licenses needed column must show that no licenses are required.

168■ Displaying Installed Licenses