7
assembling the blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).
1.Your fan may include blade grommets. If your fan has grom- mets, insert them by hand into the holes on the blades as shown in Figure 18.
Grommet
Fan Blade
Figure 18 - Inserting the grommets into the fan blades
2.Attach each blade to blade iron using three blade assembly screws as shown in Figure 19. Some fans feature a decorative medallion as well as a blade iron. Insert the assembly screws into the blade iron, through the blade and into the medallion, with the blade sandwiched between the blade iron and me- dallion as shown in Figure 20.
Figure 19 - Attaching the blade to the blade iron
Blade Iron
Medallion
Figure 20 - Attaching the blade to the blade iron and
medallion
If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal.
3.Remove the blade mounting screws and rubber shipping bumpers from the motor.
4.For each blade, insert one blade mounting screw through the blade iron as shown in Figure 21, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws.
Figure 21 - Attaching the blade iron to the fan
installing the switch housing
attaching the upper switch housing
1.Partially install two
2.Feed the upper plug connector through the center opening of the upper switch housing. See Figure 22.
Switch Housing | Housing |
Assembly | |
Mounting Plate | Screw |
Upper Plug
Connector
Upper Switch
Housing
Figure 22 - Attaching the upper switch housing to the
mounting plate
© 2002 Hunter Fan Company |
