Juniper Networks J2320 manual CLI Configuration Mode

Chapter 4: Services Router User Interface Overview

set	Set CLI properties, date/time, craft interface message
show	Show system	information
ssh	Start secure shell on another host
start	Start shell
telnet	Telnet to another host
test	Perform diagnostic debugging
traceroute	Trace route	to remote host

At the top level of operational mode are a number of broad groups of CLI commands that are used to perform the following functions:

■Control the CLI environment.

■Monitor and troubleshoot the router.

■Connect to other systems.

■Manage files and software images.

■Control software processes.

■Stop and reboot the router.

■Enter configuration mode.

To control the CLI environment, see “Configuring the CLI Environment” on page 95. To enter configuration mode, see “CLI Configuration Mode” on page 91. For information about the other CLI operational mode functions, see the J-series Services Router Administration Guide.

CLI Configuration Mode

To configure the Services Router, including system parameters, routing protocols, interfaces, network management, and user access, you must enter configuration mode. In configuration mode, the CLI provides commands to configure the router, load a text (ASCII) file that contains the router configuration, activate a configuration, and save the configuration to a text file.

You enter configuration mode by entering the configure operational mode command. The CLI prompt changes from user@host> to user@host#.

To view a list of configuration mode commands, type a question mark (?) at the command-line prompt. (You do not need to press Enter after typing the question mark.)

user@host# ?
Possible completions:
Enter	Execute this command
activate	Remove the inactive tag from a statement
annotate	Annotate the statement with a comment
commit	Commit current set of changes
copy	Copy a statement
deactivate	Add the inactive tag to a statement
delete	Delete a data element
edit	Edit a sub-element
exit	Exit from this level
help	Provide help information

Using the Command-Line Interface ■ 91