Juniper Networks J2320 manual Laser and LED Safety Guidelines and Warnings

Chapter 14: Safety and Regulatory Compliance Information

Varning! Använd inte ramp med en lutning på mer än 10 grader.

Laser and LED Safety Guidelines and Warnings

Single-mode Physical Interface Modules (PIMs) are equipped with laser transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 requirements.

Observe the following guidelines and warnings:

■General Laser Safety Guidelines on page 269

■Class 1 Laser Product Warning on page 269

■Class 1 LED Product Warning on page 270

■Laser Beam Warning on page 270

■Radiation from Open Port Apertures Warning on page 271

General Laser Safety Guidelines

When working around PIMs, observe the following safety guidelines to prevent eye injury:

■Do not look into unterminated ports or at fibers that connect to unknown sources.

■Do not examine unterminated optical ports with optical instruments.

■Avoid direct exposure to the beam.

WARNING: Unterminated optical connectors can emit invisible laser radiation. The lens in the human eye focuses all the laser power on the retina, so focusing the eye directly on a laser source—even a low-power laser—could permanently damage the eye.

Class 1 Laser Product Warning

WARNING: Class 1 laser product.

Waarschuwing Klasse-1 laser produkt.

Varoitus Luokan 1 lasertuote.

Attention Produit laser de classe I.

Safety Guidelines and Warnings ■ 269