Honda Power Equipment RM752A Your Safety Is Involved! A, A Attention! Become Alert, Training

Models: RM752A

1 40
Download 40 pages 50.84 Kb
Page 6
Image 6
SAFETY

SAFETY

A ATTENTION! BECOME ALERT!

Safety is a' primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by a single careless act of an operator.

In addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.

It has been said "the best safety device is an

informed, careful operator". We ask you to be that kind of an operator.

The designed and tested safety of this equipment depends on it being operated within the limitations as explained in this manual.

TRAINING

WSafety instructions are important! Read this manual, the tractor manual and all safety rules.

WKnow your controls and how to stop tractor engine and mower quickly in an emergency.

WOperators must be instructed in and be capable of the safe operation of the equipment, its attachments and all controls. Do not allow anyone to operate this equipment without proper instructions.

WDo not allow children or unqualified persons to operate equipment.

PREPARATION

WAlways wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hands, hearing and head.

WEnsure mower is properly mounted, adjusted and in good operating condition.

WRemove accumulated debris from mower to avoid fire hazard.

Make sure tractor PTO spring-activated locking collar slides freely and is seated firmly in mower driveline spline groove.

YOUR SAFETY IS INVOLVED! A

Ensure. all safety decals are installed and in good condition.

WEnsure shields and guards are properly installed and in good condition.

Ensure both side skids, the left side shield and either the discharge chute or right side shield are installed.

WA minimum 20% of tractor and equipment weight must be on tractor front wheels with mower in transport position. Without this weight, tractor could tip over causing personal injury or death. The weight may be attained with front wheel weights, ballast in tires or front tractor weights. When attaining the minimum 20% weight on the front wheels, you must not exceed the Roll Over Protection Structure (ROPS) weight certification. Weigh the tractor and equipment. DO NOT GUESS OR ESTIMATE.

WInspect area to be cut and remove stones, branches or other hard objects that might be thrown, causing injury or damage.

OPERATIONAL SAFETY

WKeep bystanders away from equipment while it is in operation.

WNever direct discharge toward anyone.

WOperate only in daylight or good artificial light.

Keep hands and feet away from mower while tractor engine is running. Stay clear of all moving parts.

WIf your tractor is equipped with a ROPS, you must wear your seat belt.

WAlways comply with all state and local lighting and marking requirements.

WNo riders are allowed on tractor or mower.

WStart engine from operator's seat after disengaging tractor PTO and placing trans- mission in neutral.

(Safety Rules continued on next page)

SR I1

4

F-7756 (10-89)

Page 6
Image 6
Honda Power Equipment RM752A manual Your Safety Is Involved! A, A Attention! Become Alert, Training, Preparation