Juniper Networks J2320 manual TIM514 Analog Telephony Interface Module, LEDs for TIM510

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

TIM510 LEDs indicate link status and activity. Table 38 on page 74 describes the meaning of the LEDs.

Table 38: LEDs for TIM510

Label	Color	State	Description
ALM	Red	On steadily	Alarm. A TIM510 failure requires
			monitoring or maintenance.
ACT	Green	On steadily	Active. The TIM510 is online with
			network traffic.
TST	Yellow	On steadily	Test. A test is being performed on
			the TIM510 through the Media
			Gateway Controller (MGC).
SIG	Green	On steadily	Signal. The link to the central office
			(CO) is active.

For more information about the TIM510, see the Avaya manual Hardware Description and Reference for Avaya Communication Manager.

TIM514 Analog Telephony Interface Module

The TIM514 Analog Telephony Interface Module (Figure 43 on page 74), also known as the TIM514 analog media module, has four analog telephone ports and four analog trunk ports.

Figure 43: TIM514 Analog Telephony Interface Module

NOTE: For analog direct inward dialing (DID) trunks, you must use the four analog telephone (LINE) ports. You cannot use the four analog trunk (TRUNK) ports for analog DID trunks.

You can configure TIM514 ports as described in Table 39 on page 75.

74■ Avaya VoIP Modules