Juniper Networks J2320 manual Set Up Quick Configuration Summary, Field Function Your Action, Time

Chapter 7: Establishing Basic Connectivity

■To cancel your entries and return to the Quick Configuration page, click Cancel.

NOTE: After initial configuration is complete, the Services Router stops functioning as a DHCP server. If you change the IP address of ge-0/0/0and have the management device configured to use DHCP, you lose your DHCP lease and your connection to the router through the J-Web interface. To reestablish a connection, either set the IP address on the management device manually, or connect ge-0/0/0to the management network and access the router another way—for example, through the console port.

5.To check the configuration, see Displaying Basic Connectivity Configurations on page 149.

Table 55: Set Up Quick Configuration Summary

Field	Function	Your Action
Identification
Host Name (required)	Defines the hostname of the router.	Type the hostname.
Domain Name	Defines the network or subnetwork that the	Type the domain name.
	machine belongs to.
Root Password	Sets the root password that user “root” can	Type a plain-text password that the system encrypts.
(required)	use to log in to the router.	NOTE: After a root password has been defined, it is
		required when you log in to the J-Web user interface
		or the CLI.
Verify Root Password	Verifies the root password has been typed	Retype the password.
(required)	correctly.
Time
Time Zone	Identifies the time zone that the router is	From the list, select the appropriate time zone.
	located in.
NTP Servers	Specify an NTP server that the router can	To add an IP address, type it in the box to the left of
	reach to synchronize the system time.	the Add button, then click Add.
		To delete an IP address, click on it in the box above
		the Add button, then click Delete.

Configuring Basic Settings with J-Web Quick Configuration ■ 143